PC Supervisor-M Project

Программный комплекс "СУПЕРВАЙЗЕР-М Проектный" (прежнее название - "ПК Разработка проекта скважины") предназначен для разработки проектов на строительство скважин, согласно Макету проекта.

Модули ПК обеспечивают автоматизированное решение следующих задач:

The program module "Calculation of the profile of the well" is designed to calculate the design profiles of vertical, directional and horizontal wells. Building a profile is possible in one of several ways.

The program module "Schedule combined pressure and the choice of well design" is designed to build a schedule of combined pressure, determine the allowable density of the drilling fluid and the choice of design of casing oil wells. As a result of the calculation, the well design is determined ...
The “Casing Calculation” software module allows you to prevent abnormal and emergency situations associated with the collapse of external overpressure, to the breakdown of threaded connections and breakage of the column from the resulting internal pressure due to the appropriate calculation of coefficients ...

The software module "Calculation of casing cementing" implements the following main functions...

The software module “Calculation of intervals of equal drillability and formation of dredging operations” is intended for dividing a geological section into sections of uniform (rock) properties (packs), forming a plan for dredging operations and assigning a bit (and, if necessary, a downhole motor)...

The “Drilling Fluids Assignment” software module is designed to control and assign drilling fluids to all dredging operations. The module provides the following tasks ...

The software module "Calculation of drill pipe string" is intended for the design formation of a rational design of a drill string that meets all engineering requirements for bearing capacity and operatively checks the string layout options in case of a changed composition of the string ...
The software module “Calculation of a hydraulic well flushing program” is used to form a hydraulic flushing program of wells, taking into account its design, flow rate of the drilling fluid and the pressures generated; as well as to determine the modes of tripping.

The software module "Calculation NKT" is designed to select the rational design of tubing columns that meets the engineering requirements for strength and throughput. The calculation is carried out in accordance with the governing documents ...

The program module "Calculation of the time of testing wells" is designed to estimate the required time for testing (testing) of well facilities.